How do I connect to my Contabo server for the first time?
After receiving the email titled “Your login data!”, you can connect to your server for the first time.
The method used to connect depends on the operating system running on your server:
- Linux servers are typically accessed using SSH.
- Windows servers are typically accessed using Remote Desktop (RDP).
Your credentials at a glance
| Username | Password | |
| Linux (SSH) | root (default, unless you use a custom image) | The password you set during the order process |
| Windows (RDP) | Administrator | The password you set during the order process |
| VNC console (fallback) | Separate VNC credentials - see your Customer Panel under VNC Control | Separate VNC password - not your server password |
You can find the IP address and username in the email titled “Your login data!”. The VNC access details are also included in that email.
Important: For security reasons, Contabo does not store your server password (unless you chose "Add and store password" in the Customer Panel). Keep it safe after setting it during installation. If you've lost it, see Forgot your password? below.
Haven't received the "Your login data!" email? Check your spam/junk folder, and check your order status on the Order Status page - the email is only sent once your order has been successfully provisioned. See I didn't receive my server login details after signup.
Table of contents
- Connecting to a Linux server (SSH)
- Connecting to a Windows server (Remote Desktop)
- Forgot your password?
- Can't connect? Quick troubleshooting
- Video walkthrough
- Troubleshooting connection issues
Connecting to a Linux server (SSH)
➡️ Click to show instructions
Linux servers are accessed using SSH (Secure Shell). Most operating systems include an SSH client by default.
From Windows
- Open PowerShell or Windows Terminal
PressWindows Key→ typePowerShellorTerminal→ open it. - Connect to your server
Run:ssh USERNAME@SERVER_IP
Example:ssh root@123.123.123.123 - Accept the SSH fingerprint
Typeyesand press Enter. - Enter your password
Characters will not be shown while typing - this is normal.
Alternative: You can also use PuTTY.
From Linux
- Open Terminal
- Run:
ssh USERNAME@SERVER_IP - Accept the fingerprint and enter your password
From macOS
- Open Terminal
- Run:
ssh USERNAME@SERVER_IP - Accept the fingerprint and enter your password
Connecting to a Windows server (Remote Desktop)
➡️ Click to show instructions
Windows servers are accessed using Remote Desktop Protocol (RDP).
From Windows
- Open Remote Desktop Connection
- Enter your server IP address
- Click Connect
- Enter your username and password
From Linux
Use an RDP client such as Remmina or FreeRDP.
- Install (Ubuntu example):
sudo apt install remmina - Connect using your server IP and credentials
From macOS
- Install Microsoft Remote Desktop
- Add your server IP
- Enter your login details
Forgot your password?
Contabo does not store your server password, but you can set a new one at any time via the Customer Panel:
- Log in to the Customer Panel
- Go to Compute → VPS/VDS and locate your server
- Click the three dots under More, then choose Reset credentials
- Choose a new password (you can also select Add and store password) and confirm
Your server reboots and the new password becomes active within 2–3 minutes. Note: for Linux servers, the panel reset only works for the root user.
Full guide: How to reset your server's password with Contabo (Linux & Windows)
Can't connect? Quick troubleshooting
- Linux "Permission denied" - check you're logging in as root, that you're not pasting whitespace, and that a recent password reset has had 2–3 minutes to apply.
- RDP error "can't connect" - the most common cause on fresh servers is Remote Desktop being disabled or port 3389 blocked by the firewall. See I'm getting the error "Remote Desktop can't connect..."
- Username rejected on Windows - the username is Administrator, not your email or Customer Panel login.
- Still stuck? Try connecting via the VNC console - it works even when SSH/RDP fails. See How to connect to your server using VNC
Video walkthrough
We also have a video walkthrough showing how to connect to your server:
If the video does not load, you can also watch it directly on YouTube here.
Troubleshooting connection issues
If you’re having trouble connecting to your server, see:
I Can't Connect to My Server, What Do I Do?
Server configuration
- How do I set up an SSH connection?
- How do I change my server’s port?
- How can I reinstall my operating system?
- Can I add more remote desktop connections to my server?
- How do I upload files to my Contabo server?
Next step: If you want to reinstall the operating system or deploy a different image, see How do I install my Contabo server for the first time?
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article